Shop Lighting Online - Save Money

Mt-900-ss Transformers - 120v Input - 12 Volt Output 900w Stainless Steel

FeaturesOutput voltage in table chart with 120VAC applied and fully loaded.Case Temperature does not exceed 70°C in a 40°C ambient, fully loaded.The actual transformer (xxxVA) is encapsulated in the enclosure.The transformer is dimmable with all dimmers designed for magnetic transformer.Input leads are 16 or 18 AWG line cord, output is terminal block are 12-2 AWG.The transformer uses a class B (130°C) insulation system.The transformer has three manual reset 25A magnetic circuit breaker on the secondary side.Wiring compartment has 2 or 3 knockouts sized for 3/4 inch screw cable connectors.The wiring compartment has 4 knockouts 0.87 in., 4 knockouts 1.1 in. and one two stage 1.1 in. and 1.5 in. knockout.Material - Stainless steel.The Transformer is UL listed.All transformers come with 6 in. wire length.Include Boost Tap will increase output by 10% - for longer runs.Outdoor Mt Series Mega Tap 900 Stainless Steel.SpecificationMax Load - 900W.Input - 120V/60HZ.Output Terminal Black Label - 12V 11.8V.Input current at full load - 12.8 A.Input current at No load - 1.0A.Power Factor - 0.98.Technical SpecificationsHeavy-duty NEMA 3R enclosure.120-volt primary-12-volt secondary with 13-volt boost tap.Wired for timer or photocell.Prewired 6 ft. cord and plug (3 conductor / 18ga SJT).Manual reset 20A circuit breaker on the secondary side.Screw-type terminal blocks for output wires (8-14 gauge.Enclosure temperature does not exceed 65° c fully-loaded.UL listed encapsulated transformer for longer life.Transformer is dimmable using low-voltage magnetic dimmers.Wiring compartment has(3)3/4 in. Knockouts.NEMA 3R enclosure with Polyester powder coat.Finish - Black.

Add to Shopping List