Shop Tools and Hardware Online - Save Money

Rdl-ddb-btn44 Wall-mounted Bi-directional Line-level & Bluetooth Audio Dante Interface

The Rdl D Series-btn44 Modules (ddb-btn44) Are Dante Networked, Wall-mounted Audio Interfaces That Include Bidirectional Bluetooth Audio, Unbalanced Analog Stereo Or Mono Audio Inputs And Outputs, And A Balanced Or Unbalanced Line-level Output. Stereo Audio From A Compatible Bluetooth-enabled Device Feeds Two Dante Network Audio Channels. Stereo Audio Connected To A Front-panel Mini-jack Or L And R Rca Jacks Feeds Two Other Dante Network Audio Channels. Stereo Audio Is Available To Users Through A Front-panel Mini-jack Fed From Two Dante Network Channels. A Rear-panel Terminal Block Provides Either A Balanced (+4 Dbu) Or Unbalanced (-10 Dbv) Output From One Dante Network Channel. That Output May Feed A Variety Of Rdl Wall Panels To Provide A Specific Mic Or Line Level Output To Users, Or It May Be Used To Feed The Audio Power Amplifier In The Associated Audio Zone. One Dante Channel May Be Routed Back To A Connected Device Through The Bluetooth Interface Enabling Full Duplex Communication. The D Series-btn44 Modules Are Powered From Poe. The Installer Can Customize The Module Name And Programming Password Through The Bluetooth Connection Using A Smartphone, Computer Or Tablet Terminal Program. These Modules Feature Studio-quality Circuits And Analog Filters To Provide Audio Performance Exceeding Expectations From Consumer Interface Technologies. High Performance, Simplicity Of Operation And Efficiency Of Installation Make Rdl The Best Value In Professional Bluetooth Interfaces. The Bluetooth& Word Mark And Logos Are Registered Trademarks Owned By Bluetooth Sig, Inc. And Any Use Of Such Marks By Radio Design Labs, Inc. Is Under License. Other Trademarks And Trade Names Are Those Of Their Respective Owners. Featuresreturn Audio Talk Channel From Dante Network To Bluetooth Connected Devicebluetooth Audio Input For Dante Networked Systemconsumer Audio Inputs On Mini-jack Or Rca Jacksconsumer Audio Outputs On Mini-jackbalanced And Unbalanced Audio Line Outputs On Rear Panelintuitive Single Button Bluetooth Pairing With Led Status Indicationspecial Software Not Required For Module Setupcustomize The Module Id Name And Settings Through The Bluetooth Connectionmono Or Stereo Mode For Audio Inputs Is Switch-selectable Behind Cover Platemodule Is Poe Poweredspecificationsnetwork Connector: Rj45 With Link And Speed Indicatorsdigital Audio Ethernet Protocol: Dantetransmission Rate: 100 Mbpssample Rates Supported: 44.1 Khz, 48 Khz (default)bit Depth Supported: 24 Bitsaudio Operating Levels: -20 Dbfs +4 Dbu (balanced); -20 Dbfs -10 Dbv (unbalanced), Nominalfrequency Response: 20 Hz To 20 Khz (± 0.5 Db)thd+n: < 0.1%noise Below -20 Dbfs: < -70 Dbvoice Signal Feeding Device: One Dante Channel (mono, -20 Dbfs Nominal)output: Stereo Mini Jackfrequency Response: 20 Hz To 20 Khz (± 0.75)thd+n: < 0.05%noise Below -20 Dbfs: < -80 Dbcrosstalk (channel To Channel): < 80 Dboutputs: Balanced And Unbalanced On Detachable Terminal Blockfrequency Response: 20 Hz To 20 Khz (± 0.5 Db)thd+n: < 0.05%noise Below -20 Dbfs: < -80 Dbinputs (4): Stereo Mini Jack (l And R); Rca Jack (l And R)dante Channels Used (2): L And Rthd+n: < 0.05%noise Below -20 Dbfs: < -75 Dbcrosstalk (channel To Channel): < 75 Dbindicators (5): Bluetooth (2), Network Syncpower Connection: Poe (rj45)ambient Operating Environment: 32° To 104°f (0° To 40°c)power Requirement: Poepoe: Class 0, Ieee 802.3afdimension (wxhxd): 3.52 X 4.11 X 2.09"weight: 1 Lbs

Add to Shopping List